2016
Storage area concrete tray
05.06.2016
In May 2016 SINKOS has begun the construction of new storage area concrete tray for Chemical Plant Police. The new storage area should be ready by November 2016.
Steel foundations for storage tanks
05.06.2016
In May 2016 SINKOS has signed contract for manufacture of 10 steel foundations for storage tanks.The foundations protected with epoxy resin will be ready for delivery in July 2016.
Assembly of fire-protection equipment
05.06.2016
In May 2016 SINKOS has started the assembly of fire-protection equipment (foam and sprinkler systems) at three storage tanks for fuel in port of Gdynia. The capacity of each tank is 700m3.
Laser cutting services
05.06.2016
In April and May 2016 SINKOS has been continuing the laser-cutting in stainless steel 316L for external clients. The thickness of plates varies from 5 to 15 mm.
Quench Water Tanks
05.06.2016
In April 2016 SINKOS has constructed two Quench Water Tanks for Power plant Opole. The tanks will be a part of a Desulphurization system. After delivery tanks will be protected inside with rubber lining.
Process Water Tanks
05.06.2016
In March 2016 SINKOS has constructed two process Water Tanks for Power plant Opole. The tanks will be a part of a Desulphurization system. The tanks after delivery will be protected inside with rubber lining.
Emergency Tank
05.06.2016
End February 2016 SINKOS has won the tender for design and construction of a steel Emergency Tank 1800m3 for Chemical Plant Grupa Azoty. The tank will be an element of Desulphurization System EC-2. The construction of tanks will begin in June 2016 and completion in November 2016.
2015
Completion of pre-fabrication of 3400m3 tank for power plant Opole
20.11.2015
In November 2015 SINKOS is about to complete the pre-fabrication of Auxiliary Tank capacity 3400m3 for Power Plant in Opole. Begin of assembly on site is planned for December 2015. End of montage works in Opole will be held on springtime 2016.
Completion of new production hall for SINKOS
20.11.2015
In October 2015 SINKOS has completed new production hall in his site at Police. Part of cost have been covered by UE-fund.
Contract with company from Danmark for serial manufacture of steel structures for windmills
20.11.2015
In October 2015 SINKOS has signed a frame contract with Danish client for manufacture of crane beams for wind mill industry. Planned production of the beams will exceed 360 units.
Start of construction works of three tanks for fuel in Gdynia
20.11.2015
In August 2015 SINKOS has started the construction of three storage tanks for fuel in Gdynia. The capacity of each tank is 700m3. The water tight test is planned for beginning December 2015. Surface treatment is to be completed by spring 2016.
Manufacture and delivery of stainless steel reduction ducts
20.11.2015
In September 2015 SINKOS has completed manufacture of reduction ducts in stainless steel 316L for incineration plant in Szczecin. The General Contractor there is Mostostal Warszawa.
Offshore containers for extinguishing system NOVEC
20.11.2015
In August 2015 SINKOS has completed the manufacture and sent to client three stainless steel 316L containers for offshore extinguishing system NOVEC 1230. The units will be equipped in piping and technical devices in Norway.
Concluding of a contract with ALSTOM Power
20.11.2015
In July 2015 SINKOS has concluded contract with ALSTOM Power for manufacture of 16 tanks for Power Plant Opole. Capacity of tanks: from 60 m3 up to 3400m3. Time of delivery – by end of July 2016. Part of tanks will be protected inside with rubber lining.
Completion and approval of technical documentation for two tanks in 316L for demi water
20.11.2015
End June 2015 SINKOS has completed elaboration of technical documentation for two stainless steel 316L tanks 500m3 for demineralized water. The documentation have been approved by the client ALSTOM Power. The construction of tanks will begin in March 2016 in Power Plant Opole.
Technological tanks for desulphurization plant
14.07.2015
In end of June 2015 SINKOS has concluded a contract for design and manufacture of two tanks V=500m3 for demi-water in stainless steel to be installed in power plant Opole. The both tanks will have electrical heating installation and thermal insulation to sustain min.temp.+5 C in winter.
Offshore containers for extinguishing system NOVEC
14.07.2015
In July 2015 SINKOS has completed the manufacture and sent to client two stainless steel containers for offshore extinguishing system NOVEC. The units will be equipped in piping and technical fittings in Norway.
Completion of steel structures for offshore project Martin Linge
14.07.2015
In end of July 2015 SINKOS has concluded a contract for manufacture of steel offshore structures for project Martin Linge. The last parts have been sent to surface treatment process.
Three tanks 700m3 for fuel
14.07.2015
In July 2015 SINKOS has commenced to organize the building site for construction of three tanks for fuel in port of Gdynia. Capacity of each tank: 700m3. Type of tanks: vertical axis with double shell and bottom. Material: carbon steel S355J2N.
Stainless steel condensers
14.07.2015
In June 2015 SINKOS has completed and delivered stainless steel condensers in AISI 316L. This units manufactured acc. to Danish technology will be installed in Waste water treatment plant in Legnica, as a part of drying & incineration system for sludge.
Completion of the project in Chemical plant Zlotniki
14.07.2015
In end of June 2015 SINKOS has concluded a contract for construction works and furnishings for chemical plant in Zlotniki. It have been completed construction works of foundations and montage of technological tanks as well as steel platforms and chutes. Additionally it have been fixed the feeding and outlet pipework.
Two tanks for demi-water in stainless steel
14.07.2015
In end of June 2015 SINKOS has concluded a first stage of engineering for two tanks V=500m3 for demineralization water. The stainless steel tanks are planned to be installed in Power plant Opole. The both tanks will be equipped in electrical heating installation and thermal insulation to sustain min.temp.+5 C in winter.
Gas disperser for desulphurization plant
14.07.2015
In May 2015 SINKOS has received an order for manufacture of steel gas disperser for desulphurization plant in Danmark. The delivery of the device is planned for end of August.
Reactor for Kemira
14.07.2015
In May 2015 SINKOS has completed assembly and final montage of a stainless steel reactor for liquid chemicals. The reactor has been assembled in production plant in Police.
Five off-shore containers with extinguishing systems NOVEC
14.07.2015
In April 2015 SINKOS has concluded a contract for workshop design and manufacture of five stainless steel containers for offshore extinguishing system. The units will be equipped in piping and technical fittings in Norway.
Completion of steel silos for cereal products
14.07.2015
In April 2015 SINKOS has completed and delivered four steel silos for cereal products. These units have been elaborated in system design&build. They will be installed in cereal-flower production plant in Leipzig, Germany.
Sludge Dryer In stainless steel
14.07.2015
End of March SINKOS has delivered the completed sludge dryer to the final client in Legnica. The dryer has process capacity 15 m3/hour. The device has been constructed in stainless steel acc. to Danish technological documentation. It will be installed in Waste water treatment plant in Legnica as a part of sludge drying & incineration system.
Sand bin containers
14.07.2015
In March 2015 SINKOS has completed the order for manufacture of three offshore Sand Bin Containers in stainless steel AISI 316L. Fabrication acc. to DNV standards. The containers have been delivered DAP to the client in Norway.
Three tanks 700m3 for fuel
13.02.2015
In February 2015 SINKOS has received an order for construction of three tanks for fuel in port of gdynia. Capacity of each tank: 700m3. Type of tanks: vertical axis with double shell and bottom. Time of final montage: summer 2015.
Two tanks for demi-water in stainless steel
13.02.2015
In February 2015 SINKOS has concluded a contract for design and manufacture of two tanks V=500m3 for demi-water in stainless steel to be installed in power plant Opole. The both tanks will have electrical heating installation and thermal insulation to sustain min.temp.+5 C in winter.
4 Silos
13.02.2015
In February 2015 SINKOS has received order for manufacture of four different types of storage silos for grain industry.
The three silos will be installed in factory near Leipzig in May 2015.
Condenser for sludge drying system
13.02.2015
In February 2015 SINKOS has completed construction of stainless steel condenser in AISI 316L. This device manufactured acc. to Danish technology will be installed in waste water treatment plant in Legnica, as part of dry & incineration system for sludge.
Sludge Dryer In stainless steel
13.02.2015
End of January SINKOS Has completed manufacture of a sludge dryer, capacity 15 m3/hour. The device has been constructed in stainless steel acc. to Danish technological documentation. It will be installed in waste water treatment plant in Legnica, as part of dry & incineration system for sludge
Reactor for Kemira
13.02.2015
In January 2015 SINKOS has completed design and manufacture of stainless steel reactor for liquid chemicals. The reactor will be assembled on site of Kemira Chemicals in March 2015.
Sand bin containers
13.02.2015
Beginning January 2015 SINKOSwas granted new order from Norwegian client for manufacture of three offshore sand bin containers in stainless steel 316L. Fabrication acc. to DNV standards. Date of delivery March 2015.
2014
Tanks for potable water
17.11.2014
In first week of November SINKOS has completed and handed over to the Danish client three tanks for potable water 100m3. Tanks diameter 3,40 m will be installed in water-intake station in Copenhagen.
Offshore platforms
17.11.2014
Middle November SINKOS has completed three steel platforms for seafield Gina Krog and handed them over to a client from Norway. The platforms have been sent directly to Norway by sea transport.
Condenser in stainless stel
17.11.2014
In November SINKOS has received an order from Danish client for manufacture of a condenser in stainless steel AISI 316L. The condenser will be installed in waste water treatment plant.
Sludge Dryer In stainless steel
31.10.2014
SINKOS Has received an order for manufacture of one sludge dryer capacity 15 m3/hour. The device will be constructed in stainless steel acc. to Danish technology.
Technological tank for Kemira
31.10.2014
In October 2014 SINKOS was granted an order for design and manufacture of stainless steel reactor for chemicals. The tank will be delivered to Kemira Chemicals in February 2015.
Crane beams for Wind Mill industry
31.10.2014
In October 2014 SINKOS received additional order for manufacture of steel crene beams. They will be mounted in machine cabinets upon wind mills on site.
Martin Linge offshore structures
31.10.2014
In September 2014 SINKOS was grantem an order for manufacture of additional steel structures for offshore project Martin Linge. It is a continuation of ealier completed part of project.
Gas Disperser for Power plant near Konin
31.10.2014
SINKOS has completed in September 2014 a sequent gas disperser for a power plant near Konin. The steel unit will be mounted on plantâÂÂs chimney for reduction of sulphur pollution.
Completion of project for ORLEN
31.10.2014
In September 2014 SINKOS succeeded to compete two steel tanks for fuel for ORLEN in Ostrow Wlkp. Type Of tanks: cylindrical with double bottom and shell. Capacity of tanks: 500M3. The construction has been ended on time. Leak test and final handover to client have proved to be positive.
Montage of steel ducts on site In Ueckermunde
31.10.2014
In August 2014 SINKOS has completed assembly of air ducts in a production plant in Ueckermunde, Germany. The steel parts have been produced and delivered on site by a German company.
EN ISO 1090
31.10.2014
End of August 2014 it was succeeded to obtain quite new quality Certificate acc. to code EN ISO 1090. This enables SINKOS to produce advanced steel structures acc. to highest construction market demands.
ISO 9001
31.10.2014
In August 2014 SINKOS was granted extension of certificate ISO 9001, after control audit. New issue is valid till 15-December 2015.
Gas Disperser for Czech
31.10.2014
In July 2014 SINKOS has completed manufacture of a Gas Disperser for client In Czech Republic. The structure will be mounted on chimney of a heat plant to reduce pollution of sulphur.
Tanks for Norway
31.10.2014
In July 2014 SINKOS has completed manufacture of four tanks for oil water for Norwegian client. The tanks after completion of surface treatment have been sent to Norway for final assembly.
New production facilities of SINKOS
31.10.2014
At the end of 2014 there was completed construction of Painting Shop building as brand new facility on SinkosĂÂ workshop area. The building consists of three main chambers for steel surface treatment: sand blasting, painting (for black steel), and pickling&passivation (for stainless steel). New facilities enable to keep high quality standards of surface treatment.
Offshore structures for Gina Krog
31.10.2014
In June 2014 it was signed a contract for construction of three steel platforms for project Gina Krog.
The structures are to be constructed under inspection of DNV. After completion the platforms will be sent to Norway for final assembly of technological devices.
Fuel Tanks for ORLEN
31.10.2014
In May 2014 it was commenced construction of two steel storage tanks In Ostrów Wlkp for ORLEN. The double shell tanks will have working capacity 500m3.
Stainless steel shell of tank
31.10.2014
In May 2014 it was delivered to the end client KGHM the stainless steel shell of tank designed for technological system of production of copper. The grade of steel was 1.4541.
Duplex steel tanks for Norway
31.10.2014
In May 2014 there was completed manufacture of three duplex steel tanks for Norwegian client. Tanks have been delivered by road transport to Norway.
Gas disperser for Jutland In Danmark
31.10.2014
In April 2014 it was completed the production of Gas Disperser for a client in Danmark. It will be assembled on power-plant chimney to reduce pollution of sulphur.
Tanks for notable water for Danmark
31.10.2014
In April 2014 SINKOS was granted an order for manufacture of three steel tanks for potable water.
The tanks diameter 3400 mm will have special thick 600 um layer of paint inside. The tanks will be delivered to Copenhagen, Danmark.
Tank for liquid chemicals
31.10.2014
In May 2014 there was finished the started in summer 2013 project in Chemical Plant ANWIL Wloclawek for construction of new steel tank V=1500m3 for liquid chemicals. The planned to be stored chemicals as very poisonous demanded a special organization of construction works.
Protection certificate
25.03.2014
In last days of March SINKOS has been awarded the Certificate Patent Office for special method of plasma welding of plates with flat underlayer. This fact confirms the still steering for innovative solutions in steel processing.
Test manufacture of Crane Beams
09.02.2014
SINKOS has begun test manufacture of Crane Beams for wind mill towers